WEG MediaWiki

Browning Hi-Power Mark III American 9mm Semi-Automatic Pistol

"Infantry Weapons"
"United States"
"PRO_Bolivia (Plurinational State of)"
"PRO_Brunei Darussalam"
"PRO_Dominican Republic"
"PRO_El Salvador"
"PRO_Iran (Islamic Republic of)"
"PRO_New Zealand"
"PRO_North Korea (Democratic People's Republic of Korea)"
"PRO_Papua New Guinea"
"PRO_Saudi Arabia"
"PRO_Sierra Leone"
"PRO_South Africa"
"PRO_Sri Lanka"
"PRO_United Arab Emirates"
"PRO_United Kingdom of Great Britain and Northern Ireland"
"PRO_United States of America"
"PRO_Venezuela (Bolivarian Republic of)"
"PRO_Viet Nam"
notes"The Mark III was another advancement over the Mark II released in 1988, which featured a firing pin safety and a black epoxy finish. The main distinguishing (visual) feature of the Mark III is the absence of the water drain hole below the muzzle on the forward face of the slide. The classic John Browning design in an all-business matte black, steel slide with epoxy finish, composite grip panels. Proven. This is something that sets the Browning Hi Power apart. Like it's big brother, the 1911 pistol (also designed by John Moses Browning) the Hi Power has been used for over three-quarters of a century in real world conditions. And it has done it with an exceptional record of success. As the original high capacity 9mm pistol, the Browning Hi Power set the standard for all others. On the mark. The Mark III has a great feature set: a receiver of machined steel with a black epoxy finish, a 4 5/8" barrel, high profile fixed sights. The design is superlative with it's locked breech design, single-action trigger, ambidextrous thumb safety and composite grip panels. Extra magazine included. The Browning Hi Power is a single-action, semi-automatic handgun available in the 9mm and .40 S&W calibers. It was based on a design by American firearms inventor John Browning, and completed by Dieudonné Saive at Fabrique Nationale (FN) of Herstal, Belgium. Browning died in 1926, several years before the design was finalized. The Hi-Power is one of the most widely used military pistols in history, having been used by the armed forces of over 50 countries. After 82 years of continuous production, the Hi-Power was discontinued in 2017 by Browning Arms, but it remained in production in some countries, under license. The Hi Power name alludes to the 13-round magazine capacity, almost twice that of contemporary designs such as the Luger or Colt M1911. The pistol is often referred to as an HP (for "Hi-Power" or "High-Power"), GP (for the French term, "Grande Puissance"), BAP (Browning Automatic Pistol), or BHP (Browning High-Power). The terms P-35 and HP-35 are also used, based on the introduction of the pistol in 1935. Several sources indicate that the official name was initially "High Power", while it was manufactured in Belgium by Fabrique Nationale prior to the German occupation in World War II. Production of the weapon then moved to a John Inglis and Company plant in Canada; at some date afterwards, the name was changed to "Hi Power". (Some sources indicate that the name change was not until the 1950s.) Production returned to Belgium after the war, in 1944 or 1945. Nonetheless, the term Hi Power has been the most commonly used in articles over the past decades, regardless of the year of manufacture. Versions of the handgun continued to be made at the FN factory in Belgium under Wehrmacht control, with the designation "9mm Pistole 640(b)". The Browning Hi-Power has undergone continuous refinement by FN since its introduction. The pistols were originally made in two models: an "Ordinary Model" with fixed sights and an "Adjustable Rear Sight Model" with a tangent-type rear sight and a slotted grip for attaching a wooden shoulder stock. The adjustable sights are still available on commercial versions of the Hi-Power, although the shoulder stock mounts were discontinued during World War II. In 1962, the design was modified to replace the internal extractor with an external extractor, improving reliability. Standard Hi-Powers are based on a single-action design. Unlike modern double-action semi-automatic pistols, the Hi-Power's trigger is not connected to the hammer. If a double-action pistol is carried with the hammer down with a round in the chamber and a loaded magazine installed, the shooter may fire the pistol either by simply squeezing the trigger or by pulling the hammer back to the cocked position and then squeezing the trigger. In contrast, a single-action pistol can only be fired with the hammer in the cocked position; this is generally done when a loaded magazine is inserted and the slide cycled by hand. In common with the M1911, the Hi-Power is therefore typically carried with the hammer cocked, a round in the chamber and the safety catch on (a carry mode often called cocked and locked in the United States or "made ready" in the UK, or sometimes called condition one). The Hi-Power, like many other Browning designs, operates on the short-recoil principle, where the barrel and slide initially recoil together until the barrel is unlocked from the slide by a cam arrangement. Unlike Browning's earlier Colt M1911 pistol, the barrel is not moved vertically by a toggling link, but instead by a hardened bar which crosses the frame under the barrel and contacts a slot under the chamber, at the rearmost part of the barrel. The barrel and slide recoil together for a short distance but, as the slot engages the bar, the chamber and the rear of the barrel are drawn downward and stopped. The downward movement of the barrel disengages it from the slide, which continues rearward, extracting the spent case from the chamber and ejecting it while also re-cocking the hammer. After the slide reaches the limit of its travel, the recoil spring brings it forward again, stripping a new round from the magazine and pushing it into the chamber. This also pushes the chamber and barrel forward. The cam slot and bar move the chamber upward and the locking lugs on the barrel re-engage those in the slide."
countryOfOrigin"United States"
proliferation"Argentina, Australia, Austria, Bahrain, Bangladesh, Barbados, Belgium, Belize, Bermuda, Bolivia (Plurinational State of), Botswana, Brazil, Brunei Darussalam, Burundi, Cambodia, Canada, Chad, Chile, China, Colombia, Congo, Cuba, Cyprus, Denmark, Dominican Republic, Ecuador, El Salvador, Estonia, Finland, France, Germany, Ghana, Greece, Guatemala, Honduras, Hungary, India, Indonesia, Iran (Islamic Republic of), Iraq, Ireland, Israel, Jamaica, Jordan, Kenya, Kuwait, Lebanon, Liberia, Libya, Lithuania, Luxembourg, Malawi, Malaysia, Mali, Mozambique, Myanmar, Namibia, Nepal, Netherlands, New Zealand, Nigeria, North Korea (Democratic People's Republic of Korea), Oman, Pakistan, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Romania, Rwanda, Saudi Arabia, Sierra Leone, South Africa, Sri Lanka, Sudan, Suriname, Syria, Turkey, Uganda, United Arab Emirates, United Kingdom of Great Britain and Northern Ireland, United States of America, Uruguay, Venezuela (Bolivarian Republic of), Viet Nam, Zambia, Zimbabwe"
Empty array
Empty array
"Bolivia (Plurinational State of)"
"Brunei Darussalam"
"Dominican Republic"
"El Salvador"
"Iran (Islamic Republic of)"
"New Zealand"
"North Korea (Democratic People's Republic of Korea)"
"Papua New Guinea"
"Saudi Arabia"
"Sierra Leone"
"South Africa"
"Sri Lanka"
"United Arab Emirates"
"United Kingdom of Great Britain and Northern Ireland"
"United States of America"
"Venezuela (Bolivarian Republic of)"
"Viet Nam"
name"Alternate Designation"
value"Browning Hi-Power Mark III"
value"9mm Semi-Automatic Pistol"
value"Fabrique Nationale (FN) John Inglis & Co. Browning Arms"
name"In Service"
value"13 cartridges"
name"Mode of Fire"
value"Single action"
name"Muzzle Velocity"
value"350 m/s"
value"Half-cock notch, manual thumb safety, firing pin block, and magazine disconnect"
name"Trigger Pull"
value"7.5 lb"
name"Effective Firing Range"
value"50 m"
name"Dispersion (firing 10 shots with rest)"
value"at 15 metres: 95 mm (height 50 mm, width 45 mm); at 30 metres: 200 mm (height 105 mm, width 95 mm); at 50 metres: 320 mm (height 170 mm, width 150 mm)"
value"197 mm"
name"Barrel Length"
value"118 mm"
value"127.5 mm"
name"Width, with Stock"
name"Width, without Stock"
name"Weight, Empty"
value"0.9 kg"
name"Weight, Loaded Magazine"
value"1.060 kg"
value"9×19mm Parabellum"
value"13 cartridges"
notes"Genuine Browning Hi-Power P-35s are still manufactured by FN Herstal of Belgium and Portugal and under licence by Fabricaciones Militares (FM) of Argentina. The Hi-Power remains one of the most influential pistols in the history of small arms. It has inspired a number of clone manufacturers (including Charles Daly of the Philippines & the US, FEG of Hungary, Arcus of Bulgaria, IMI of Israel, and others). Many modern pistols borrow features from it, such as the staggered column high-capacity magazine, and the Browning linkless cam locking system (which on modern pistols is often simplified so that the barrel locks into the ejection port, meaning the barrel and slide do not have to be machined for locking lugs). Until recently, FEG made an almost exact clone in 9mm and .40 S&W, but the company now manufactures a version with modifications to the barrel, linkage, and slide stop that are incompatible with genuine Hi-Powers. Arcus has also superseded its Arcus 94 Hi-Power clone with the Arcus 98DA, a model that draws heavily from the Hi-Power but is capable of double-action operation."
notes"The original P35, as noted earlier, featured an internal extractor. During World War II, it was manufactured by Inglis of Canada for Allied use, and by FN in occupied Belgium for German use. The P35s made under Nazi occupation were designated as the Pistole 640b. Most Canadian P35s were manufactured with a parkerized finish, while most P35s manufactured in occupied Belgium had a blued finish. In 1962 the internal extractor was replaced with a more durable and reliable external extractor alongside other modifications, including a 2-piece barrel and modifications to the locking system for improved durability. Later barrels and frames are not interchangeable with earlier ones."
notes"The L9A1, was the British designation for the military version of the post-1962 Hi-Power, and is marked 'Pistol Automatic L9A1' on the left side of the slide. It started to replace Inglis variants in British service from the late 1960s, and the two types remained in service together until the Inglis variants were finally retired in the late 1980s. It is still in service with the UK military forces, although now fitted with the more ergonomic Mk2 ambidextrous safety and grips. The L9A1 was also widely used by other Commonwealth armed forces. The Hi-Power was the pistol issued to the British Special Air Service throughout the Cold War era. It was phased out in 2013 and replaced with the Glock 17."
name"Mark I"
notes"The Mark I is among the best-known models of the P35 developed over the last 50 years. P35s were first imported into the US in 1954 – the US civilian market P35s had the 'Browning Arms Company' stamp on the left side of the slide (to meet the import requirement for US sales under ATF Section 478.112). These P35s lack the provision of the lanyard ring – the left side pistol grip for a Mark I is fully covered unlike those produced for military and law enforcement use. A wide variety of options and features are available on the P35 models. Recently, Hi-Power pistols have become available in the .40 S&W and .357 SIG loadings. The use of these calibres in guns designed and built for 9×19mm Parabellum has created cases of broken or warped frames. Only Hi-Powers specifically built for these rounds should be used to fire them. The pistols manufactured for these two rounds are easily identified by examining the left side of the slide – a groove is machined into the side of the heavier slide to allow clearance for the slide release. Genuine FN-produced P35s (either FN (Europe/international) or Browning (USA) for the civilian market will have a 245-prefix serial number. Some Hi-Power variants (Type 65, Type 73) incorporate production changes e.g. spur hammers (commonly seen for 1971–present civilian market P35s) and/or 2-piece barrels (1965–present). The 'Type 73' variant (with an elongated barrel bushing) of the Mark I was produced into the late 1980s (to 1987) by FM Argentina when Mark II production commenced in the early-mid-1980s (Belgium)."
name"The Pistol, Browning FN 9mm, HP No. 2 MK.1/1 Canadian Lightweight Pattern"
notes"The Pistol, Browning FN 9mm, HP No. 2 MK.1/1 Canadian Lightweight Pattern was a series of experimental aluminum/aluminum alloy framed Browning Hi-Power pistols by the Canadian Inglis Company that reduced the weight by as much as 25% (8.5 oz lighter to 25.5 oz).[21] Two scalloped cuts were made on both sides of the steel slide as well as in front of the rear sight. The reception to this was positive and so six prototype frames were machined from solid aluminum and two send to each of the Canadian, American, and British governments for testing. The Canadian and English governments concluded that sand and dirt caught between the steel slide and aluminum frame substantially increased wear. The steel locking block also wore the holes in its aluminum frame. After testing Inglis cast 29 frames and assembled 21 pistols and tested them which was met with various problems. The lightweight program was ended in Canada in 1951. In 1952, a US Major General Kessels requested one and took it with him in the Korean War."
name"The Mark I Lightweight"
notes"The Mark I Lightweight is a very rare variant of the Mark I made with a lightweight alloy frame originally intended for paratroop use. According to Massad Ayoob, these were introduced commercially in the 1950s but never caught on. The Lightweights are marked only with Fabrique Nationale's rollmarks, not Browning's."
name"Mark II"
notes"Mark II is an upgraded model of the original Hi-Power introduced in the early '80s. Some of the upgrades were ambidextrous thumb safeties, nylon grips, 3-dot sights, and a throated barrel."
name"Mark III"
notes"Mark III was another advancement over the Mark II released in 1988, which featured a firing pin safety and a black epoxy finish. The main distinguishing (visual) feature of the Mark III is the absence of the water drain hole below the muzzle on the forward face of the slide."
name"The Capitan"
notes"The Capitan is a Mark III variant that features adjustable tangent rear sights and a "ring hammer" like the early model HP35, checkered walnut grips, and a blued finish. It was reintroduced in 1993 and is still in production (c.2004)"
name"The Practical"
notes"The Practical is a Mark III variant that features a matte-blued slide and contrasting silver-chromed frame. In addition, this model has wraparound Pachmayr rubber grips and a "ring hammer". The Practical has fixed or adjustable sights, and is available in either 9 mm or .40 S&W. Magazines for all Practical models sport Pachmayr base pads; magazines feature a cartridge capacity of 13 rounds in 9 mm and a cartridge capacity of 10 rounds in .40 S&W."
notes"The HP-SFS (Safe-Fast-Shooting) is a current variation on the Hi-Power Mark III with a modified firing mechanism. After the weapon is loaded, the hammer is pushed forward, which automatically activates the safety catch. When the shooter is prepared to fire, the safety is pressed down with the thumb, releasing the hammer to spring backwards into the usual, single-action position. A similar system is available for modifying Colt M1911A1s. Magazines are interchangeable with the Mark III and others."
name"The BDA and BDAO"
notes"The BDA and BDAO models were first produced in the 1980s by FN. The BDA model is double-action, and the BDAO model is "double-action only," both versions differing from the usual single-action operation of the P35. These designs have also been marketed as the FN HP-DA and Browning BDA. The DA and DAO models retain many features of the P35, and both are available in full-sized and compact versions. The performance of these models is consistent with FN's high standards. These models resemble the P35, but the most distinguishing feature is the extended SIG-Sauer style trigger guard. Many parts are interchangeable with the P35, but the magazines (although similar) are not. The compact versions also utilise shorter magazines."
name"Browning BDM"
notes"The Browning BDM Model is sometimes erroneously attributed as a special model of the Hi-Power family of pistols. This is a unique pistol design only bearing an external similarity to the Hi-Power. The BDM was produced during the 1990s in North America by Browning Arms Company, and not by FN. The Browning BDM (Browning Double Mode) pistol incorporates many features of the BDA model. It can be switched from double-action/single-action mode to "revolver" mode (Double-Action Only) by the flip of a slide-mounted switch (this requires the use of a flathead screwdriver or a coin, as the switch doesn't have a tang)."
name"The Rosario, FM90 and FM95"
notes"The Rosario, FM90 and FM95 models are manufactured by FM. The Rosario is an almost exact copy of the Mark II intended for Argentine and Latin American sales. The FM90 was an export model based on the Mark II, but with a "Colt style" slide without the characteristic bevelled front end, first made in 1990.[25] Rubberized pistol grips (similar to the Pachmayr grips used for P35s) with finger grooves were used in place of the traditional slabside wood grips. The FM95 was the current export model (until 2002) based on the Mark III, also with the "Colt style" slide. The last models, until 2010, are the M02 AR (modernised version of the M95, with a new single-action system by Fabrique nationale) and the M03 AR (not dated 2003, as it would seem, actually a .40 S&W version of M02 AR) with their Detective versions"
name"Pistol Auto 9mm 1A"
notes"Pistol Auto 9mm 1A is manufactured in India by the Ordnance Factories Board at Rifle Factory Ishapore. It is a licensed copy of the Canadian Inglis 9mm pistol with a matte black finish and black plastic grips."
name"The Detective"
notes"The Detective is a short-slide HP produced by FM. The Detective slide group was also available without the frame, and is interchangeable with other FM and FN Hi-Power P35s. The pistol and slide group have not been available for North American sales since the late 2000s, but can be found in resale outlets."
name"The Arcus 94"
notes"The Arcus 94 is a single-action semi-automatic pistol manufactured by Arcus of Bulgaria as an unlicensed clone. There is a compact version, the Arcus 94C. It has been succeeded in production by the double-action Arcus 98DA."
name"MA-5 Mk I"
notes"The MA-5 Mk I is a variant of the Hi-Power adopted by the Tatmadaw before they eventually adopted the MA-6 (P226 clone) and the MA-5 Mk II (Glock clone)."
Retrieved from "https://odin.tradoc.army.mil/mediawiki/index.php?title=Browning_Hi-Power_Mark_III_American_9mm_Semi-Automatic_Pistol&oldid=40705"